b64f9dda-untitled-design-6_105k02b000000000000028

TYR Tactical Female EPIC-DSX Assaulter’s Plate Carrier

available from Aquaterro

ENHANCED DESIGN FEATURES

QUICK RELEASE

Taktic buckle system provides a quick connect for users to don & doff the plate carrier utilizing one hand in less than two seconds.

BREATHABILITY & MOISTURE PROTECTION

Antimicrobial/FR treated padded spacer mesh system. Slotted poly mesh base cummerbund for increase ventilation.

FIND OUT MORE

PATENTED FEMALE SHAPE

5effc7b7-11032020-newcatalogimages-157-a_100000000000000000001o

ENHANCED DESIGN FEATURES

SCALABLE SYSTEM

QASM buckle system and Zippers for Assaulter’s
Zip-On Back Panels. Flush admin chest pocket with internal elastic keepers.

Compatible with the complete line of Tyr Tactical armoured accessories.

PATENTED INTEGRATED BALLISTIC FRAMEWORK

Increases structural integrity & reduces back face deformation.

FIND OUT MORE

PATENTED BALLISTIC VEIN^®

ENHANCED DESIGN FEATURES

ELONGATED MATERIAL LIFE & ABRASION RESISTANCE

Engineered utilising patented PV^® material.

PLATE POCKET STYLE

Incorporates a Gusseted Plate Pocket which relieves tension and pressure normally placed on the body from hard plates in classic plate pocket configuration. Available in several different shapes depending on the profile (thickness) of your plate.

ACCESS SPEC SHEET

e0a204d9-11032020-newcatalogimages-156-a_100000000000000000001o

DOWNLOAD FULL SPEC SHEET

Find out more about the TYR Tactical Female EPIC-DSX Assaulter’s Plate Carrier by downloading the spec sheet below. Contact Aquaterro for further information on 03 9754 2922.

DOWNLOAD SPEC SHEET

Contact the Aquaterro Business Development Team
for more information (03) 9754 2922

The SGX11 Street Guard features a full Dyneema liner for excellent cut-resistance around the entire hand while still maintaining great dexterity and comfort for all-day wear. EN388:2016 - 3X42D. WARNING: Cut-resistant gloves are not cut-proof. Cut-resistant data is captured in a controlled laboratory setting. The data is intended to provide users a means of comparing potential glove performance, but does not provide a definitive statement on the expected performance in real-world applications. Use common sense and exercise caution when encountering potential hazards.

The SGX11 Street Guard features a full Dyneema inner-liner for enhanced cut-resistance around the entire hand, while still offering great comfort and dexterity
Digitized synthetic leather palms with Extreme-Grip non-slip cradle, offering sure grip and positive weapon control
Stretch back of hand for comfort and breathability
Versatile, tactical design with excellent durability

A flame resistant balaclava that is worn when conducting Direct Action tasks that will provide user protection from flame/incendiaries. An ergonomic design and flat seam construction techniques allow for enhanced comfort when worn in conjunction with a helmet,eye protection, ear protection and/or O2 mask. FR mesh materials and construction techniques, allowing the balaclava to be worn in either an eyes exposed only or full face exposed manner, allows for enhanced ventilation that mitigates overheating and undue fog/moisture build-up on eye protection.

Design

Lorem ipsum dolor sit amet consectetur adipisicing elit. Quas cum cumque minus iste veritatis provident at. Read More

Code

Lorem ipsum dolor sit amet consectetur adipisicing elit. Quas cum cumque minus iste veritatis provident at. Read More

Launch

Lorem ipsum dolor sit amet consectetur adipisicing elit. Quas cum cumque minus iste veritatis provident at. Read More

The TYR Tactical® Rifle Mag Pouch – Patented Combat Adjustable Happy Mag® combines two of our most popular designs, the CLPA and Happy Mag® Pouch. The CLPA conforms to both the 5.56 and 7.62 Rifle magazines. Engineered with an extremely clean and simple tension adjustment at the bottom, you can change its capabilities in seconds without having to remove the pouch itself. Top retention strap can also be removed for easy access to the rifle magazine. Integrated Happy Mag® clip and contact-grip material secure the rifle mag when retention strap is not being utilized allowing for a smooth draw.

DESCRIPTION

Flame resistant technical coverall purpose built to be worn while conducting direct action tasks. Fit is fully articulated and achieves two piece mobility with a full range of unrestricted motion. Streamlined design retains proximity to the body, moves easily over a base layer and works as part of a clothing system.

FEATURES

- Low profile hybrid collar with button and Velcro® closure shields neck or can be worn open
- Body centerline zip, lower leg side zips and enlarged ankle cuffs to ease on and off
- External waist band with Velcro® adjustment tabs adds sizing flexibility of 2.5”/6cm and retains full articulation in one piece fit
- Belt loops fit -150 Rigger’s Belt or E-220 Rigger’s Harness
- Cuff Velcro® closures allow for rolled up sleeves or fully enclosed sleeves
- Mesh vents under arms allow air flow under personal protective equipment
- Two external chest pockets with Velcro® closures; two external chest drop-in pockets; two cargo pockets with dump pocket capability; two secure upper arm pockets; all with daisy chain hard points
- Removable, articulated, soft knee and elbow pads fit into integrated pockets
- Velcro® ankle cuff closure seals over boots
- 4x4.5 Velcro® upper arm identification patches with V-Lite™ retention ring

MATERIALS

- TenCate Defender™ M 6.5oz. rip stop
- TenCate Defender™ M 5.5oz Mesh ( underarm venting)
- EV50 10mm Foam (elbow and knee pads)

CARE

- Machine wash in warm water (30°C).
- Do not use fabric softener.
- Tumble dry on low heat.
- Do not iron.

This 2015 is a special NYPD version of our 26 polycarbonate riot baton. It features the LAPD Stop, a hard plastic non-slip tapered grommet that sits between the grip and the shaft. It has a foam grip that helps to keep the baton securely in the hand and increases baton retention and subject-control holds.

Features

1.25″ diameter
Made of durable polycarbonate
Foam grip
Nylon cord thong
Limited lifetime repair or replacement guarantee
Made in the USA

The Peacemaker #PM-BTP004 baton pouch is designed for secure carriage of ASP 21” batons. #PM-BTP004 can be mounted to an overt carrier or a duty belt. Elastic sides allow for extended baton stowage.

Length: 250mm
Width: 55mm
Colour: Black or Navy
Finish: 900 Denier 100% Polyester
Closure: Dual Snap & Velcro
Features: Drainage Eyelet, Elastic side for extended baton
stowage.

Load Carriage Options
Carrier: Nylon Modular Lightweight Load-carrying
Equipment (MOLLE) system is used to attach
#PM-BTP004 to the Pouch Attachment Ladder
System (PALS) on all overt load bearing carriers.
Duty Belt: Nylon Modular Lightweight Load-carrying
Equipment (MOLLE) system is used to attach
#PM-BTP004 to standard 50mm/2” duty belt.
Covert Pouch Rail: Nylon Modular Lightweight
Load-carrying Equipment (MOLLE) system is used to attach
all operational pouches to #PMPR0001 Peacemaker Pouch
Rail for covert operators.

The Peacemaker PM-AP002 administration pouch is designed for the secure carriage of personal items and duty gear. The dimensions of the pouch allow for the carriage of most mobile devices, small notebooks, pen etc. An internal pocket and elastic loops provide storage management. PM-AP002 can be mounted to an overt carrier or a duty belt.

Height: 180mm
Width: 130mm
Colour: Black or Navy
Finish: 900 Denier 100% Polyester
Closure: Slide Fastener
Features: Internal pocket and elastic loops for storage.

Load Carriage Options
Carrier: Nylon Modular Lightweight Load-carrying
Equipment (MOLLE) system is used to attach
#PM-AP002 to the Pouch Attachment Ladder
System (PALS) on all overt load bearing carriers.
Duty Belt: Nylon Modular Lightweight Load-carrying
Equipment (MOLLE) system is used to attach
#PM-AP002 to standard 50mm/2” duty belt.
Covert Pouch Rail: Nylon Modular Lightweight
Load-carrying Equipment (MOLLE) system is used to attach
all operational pouches to #PMPR0001 Peacemaker Pouch
Rail for covert operators.

The Peacemaker #PM-HCP003-BLK handcuff pouch is designed for secure carriage of multiple variants of Hiatts handcuffs.

#PM-HCP003-BLK can be configured to mount to a user’s load bearing equipment or a duty belt.

Length: 120mm
Width: 100mm
Colour: Black
Finish: 900 Denier 100% Polyester
Closure: Single Snap & Velcro hook and loop
Features: Internal glove sleeve for disposable nitrile gloves.
Snap stud for key ring attachment.

Load Carriage Options
Carrier: Nylon Modular Lightweight Load-carrying
Equipment (MOLLE) system is used to attach
#PM-HCP003-BLK to the Pouch Attachment Ladder
System (PALS) on all overt load bearing carriers.
Duty Belt: Nylon Modular Lightweight Load-carrying
Equipment (MOLLE) system is used to attach
#PM-HCP003-BLK to standard 50mm/2” duty belt.
Covert Pouch Rail: Nylon Modular Lightweight
Load-carrying Equipment (MOLLE) system is used to attach
all operational pouches to #PMPR0001 Peacemaker Pouch
Rail for covert operators.

The Peacemaker #PM-RDP003-BLK radio pouch is designed for use with a range of portable radios.

#PM-RDP003-BLK can be configured to mount to a user’s load bearing equipment or a duty belt.

Length: 190mm
Width: 80mm
Colour: Black
Finish: 900 Denier 100% Polyester
Closure: Buckle

Load Carriage Options:
Carrier: Nylon Modular Lightweight Load-carrying
Equipment (MOLLE) system is used to attach
#PM-RDP003-BLK to the Pouch Attachment Ladder
System (PALS) on all overt load bearing carriers.
Duty Belt: Nylon Modular Lightweight Load-carrying
Equipment (MOLLE) system is used to attach
#PM-RDP003-BLK to standard 50mm/2” duty belt.
Covert Pouch Rail: Nylon Modular Lightweight
Load-carrying Equipment (MOLLE) system is used to attach
all operational pouches to #PMPR0001 Peacemaker Pouch
Rail for covert operators.

FURY Hybrid Case Technology allows for increased muzzle velocity and greater energy than traditional brass cases. SIG FURY Hybrid Case Ammunition outperforms standard ammunition in similar calibers, with decreased bullet drop and increased energy on target. Developed for the U.S. Military's Next Generation Weapon Systems

the MG 338 is a belt-fed, lightweight medium machine gun weighing under 20lbs., chambered in 338 Norma Mag. The MG 338 features a short-stroke gas piston system and a proprietary recoil mitigation system, with a free-floating, quick-change barrel, ambidextrous controls, switchable feed tray, charging handle that can be alternated to either side depending on operator preference.

The XM250 is the US military designation for the SIG-LMG a 6.8×51mm, gas-operated, belt-fed, light machine gun designed by SIG Sauer for the U.S. Army's Next Generation Squad Weapon Program in 2022 to replace the M249 light machine gun. The XM250 features a free-floating reinforced M-LOK handguard for direct accessory attachment onto the "negative space" (hollow slot) mounting points.

SIG SAUER is proud to announce the official expansion of the MCX series of rifles with the new MCX-SPEAR chambered in 277 SIG FURY. The MCX-SPEAR was developed with direct input from U.S. warfighters to provide more power, distance, and accuracy to replace the current M4 rifle platform. The MCX-SPEAR is now the most innovative and advanced AR platform in the world.

The PICO-DSX is an ultra-lightweight and configurable plate carrier system. It's engineered with revolutionary PV® material for significant weight reduction with increased resistance to abrasion.

FEATURES:
Completely scalable
The Taktic Buckle System releases the plate carrier utilizing one hand in less than two seconds
TYR Tactical's Lightest Plate Carrier at 1.95 lbs
Extremely feature-rich
Certified "Bomb Proof" TYR Tactical® product

The SureFire Warden Blast Regulator for 5.56 and 7.62 mm weapons is engineered to direct the concussive blast of the fired round forward of the weapon system without venting gas to the side, as seen with standard muzzle brakes. This aids in reducing the overpressure felt by others immediately to the left and/or right of the shooter’s firing position. It also limits any dust signature from the weapon when fired from a prone position.

This version of the Warden quickly and easily mounts to any SureFire SOCOM Fast-Attach® 5.56 or 7.62 muzzle device through the same patented system found on SureFire SOCOM Fast-Attach® Series suppressors. Unlike sound suppressors, Wardens are not NFA devices and are available wherever SureFire products are sold, without any of the restrictions associated with suppressors.

Reign Over Recoil. SureFire SFMB muzzle brake suppressor adapters greatly reduce both recoil impulse and muzzle rise so that your weapon tracks straight back, keeping you on target for faster shot-to-shot recovery. Our proprietary Impulse Diffusion design minimizes side blast and rear-directed concussion effects. Precision machined from U.S. mill-certified heat-treated stainless steel bar stock and DLC-coated for extreme durability, they are available for a variety of weapon calibers and muzzle thread specs, and every SFMB serves as a rock-solid mounting adapter for SureFire’s combat-proven SOCOM Series Fast-Attach® suppressors. The SFMB design incorporates multiple bearing surfaces to ensure superior suppressor alignment. Blind pilot holes at the 3 o’ clock and 9 o’clock positions enable fine-tuning of recoil characteristics for individual shooting styles or ammunition characteristics. Blind pilot holes at the 6 o’clock position enable indexing the adapter at bottom dead center. All that’s required is a basic hand drill and appropriate drill bits.

The 6354RDS holster is specifically designed for firearms with red dot sights mounted to them. This model features the Automatic Locking System (ALS®), an internal locking device that retains the weapon in all directions providing secure retention in an open-top holster for tactical use. With ALS, once the weapon is holstered, it "locks" into place, providing an extra measure of security for the weapon. Further, the holster is completely operable with the thumb, making it very instinctive to use. And finally, once the device is de-activated a simple straight up draw can be used. Key to comfort and stability are the lightweight double leg strap and the leg shroud. SafariSuede™ lining helps protect the gun's sights and finish.

ASSAULT BALACLAVA FR GEN 2

A flame resistant balaclava that is worn when conducting Direct Action tasks that will provide user protection from flame/incendiaries. An ergonomic design and flat seam construction techniques allow for enhanced comfort when worn in conjunction with a helmet, eye protection, ear protection and/or O2 mask. FR mesh materials and construction techniques, allowing the balaclava to be worn in either an eyes exposed only or full face exposed manner, allows for enhanced ventilation that mitigates overheating and undue fog/moisture build-up on eye protection.

Technical Features

PPE Compatible allowing the balaclava to be functionally worn with an all-mission helmet

Design & Fit

Optimal face and neck coverage and enhanced breathability over the mouth

A messenger style bag capable of carrying a sub-gun platform in a secure and concealed manner. The internal divider face is configured with Velcro® loop allowing for the attachment of after-market modular pouches.

Pack Compression Strap Configuration

Ambidextrous removable/scalable cross body strap allowing the bag to be carried in a secure cross slung manner

Pack Design & Construction

c.15l Capacity – allowing the bag to be employed as a shoulder slung messenger style bag

Centre top grab handle allows for the ease of transfer from vehicles when dismounting

Pack Loading & Closure Configuration

Tri-access main compartment with top and side zips allowing for ease of access to main compartment

Pack Pocket Configuration

External zip pocket (with retention lanyard & pelican clip) for ease of access and secure carriage of mission essential personal items

Pack Suspension Configuration

Ambidextrous high/low mount carriage options allowing the bag to be carried in either a high or low mount manner

Ambidextrous removable/scalable shoulder strap allowing for left or right hand side carriage options

Lightweight, anatomically-shaped knee protectors.

A lightweight, anatomically shaped knee cap that can be worn in conjunction with the LEAF Assault Pant AR/FR/SV. The Knee Cap can also be worn in a stand-alone manner.

Technical Features

Adjustable elastic straps allows for sizing flexibility.
Thermoplastic shell provides impact and puncture protection.

FOR SPECIAL OPERATIONS FORCES

Following five years of extensive collaborative research and development, Mustang Survival’s newest inflatable is the smallest self-righting inflatable PFD for maritime special operations on the market. The MD 1502 incorporates a new manual inflator. Using advanced inflator technology co-developed with Hammar®, our exclusive new programmable automatic inflator (MD1500) offers ultimate control: the user can switch between inflation settings triggered by depth, time submerged in water, or a combination of both. The LPU is also available with our standard HIT inflator (MD1501).

Features

Weighing 1 lb., it is the smallest self-righting inflatable PFD for maritime special operations, providing 40 lbs of buoyancy.
Inflation chamber has a new ultralight membrane film.
Almost invisible low-profile design allows full field of vision and head mobility without interfering with equipment.
Easily connects to almost any armor carrier.
Utilizes a new manual inflator.
Harness accessory allows device to be used as a stand-along life vest with no armor carrier.
SOLAS retro reflective tape attached to the bladder via hook and loop so that it can be removed or switched.
to GLINT tape by the user.

All Closeout Item Sales Are Final - No Returns

When we started the WetWorX Maritime Assault Gloves, the very first thing we wanted to ensure was the user wouldn’t feel a great disparity between their warm water and cold water gloves. Our materials were carefully chosen to provide significant commonality between the warm & cold gloves while maintaining the climate centered traits necessary to operate in a wide variety of environments. Paying close attention to the human factors and ergonomics associated with maritime operations, we have produced gloves with outstanding wet grip, tactility, and range of motion. Built into the WetWorX gloves is the durability needed for hot climate operations and the heat retaining traits needed for cold water operations. Grab a set and see for yourself, you won’t be disappointed.

The WetWorX cold weather glove combines the warmth of 2mm neoprene and wind resistant patches with a textured grip for enhanced wet environment hold and confidence.

“Gripmax” thumb construction with conductive material = grip where
you need it, conductive where you need it
Batting glove hook and loop wrist closure = easy don and doff
Single layer .8mm embossed grip textured palm = enhanced wet grip
Laminated wind resistant patches = increased warmth
Wrap over fingertip construction = better sense of touch
Seamless back of hand construction = longer wear time comfort
Wrap-up index finger sidewall = enhanced trigger feel
Conductive index finger
Keyhole thumb construction = increased articulation
Gasketed at wrist to prevent flushing = warmer hands

The PlateFrame Modular™ (PF-M™) is taking the original PlateFrame® to the next level. Engineered to optimize comfort, performance and modularity, the PF-M™ comes equipped with the patented (US10605574) adjustable Auto-Fit Cummerbund™ that helps distribute the tactical load across/around the upper torso and not solely on the trapezius muscles. PlateFrames are customized to fit the following – any 10x12, each size of shooter/swimmer, (E)SAPI, and the Velocity Systems ULV plates.

FEATURES:

Auto-Fit Cummerbund™ with Internal Cable Management
Integrated Interior Load Bearing Wings
Closed Cell Comfort Foam
E-Buckles™

The blink of an eye. That’s how fast a mission can fail if vision is compromised. But there is more to goggles than protection. Comfort is essential for eliminating distraction. The field of view must be wide and unobstructed, and the visual clarity must be razor sharp and true.

A standard issue goggle that sets the standard, the Oakley SI BALLISTIC GOGGLE 2. takes a lean-and-mean approach that maximizes comfort and offers a field of view that earns the rank of best in class. The low profile design weighs a mere 3.7 ounces, yet its impact resistance complies with ANSI Z87.1-23, EN-166 BT K and U.S. Army MCEPS, plus MIL-DTL-43511 ballistic impact resistance requirements in all lens configurations.

Built into the ZipFlip’s™ internal structure, the FlipLite™ is a lighter, scaled-back option when using a smart device or navigational equipment.

Features:

Flip-down phone panel fits smart devices as large as a tablet
MOLLE/PALS attachment straps
Additional quick closure attachment
Made of ultra-light, rigid composite plastic

You're first on the scene. There are victims in the water and time is running out... what can you do?;The first person on the scene is not always equipped to execute a safe water rescue. Without the proper equipment and training, the first responder may not be able to execute a safe rescue, greatly reducing the probability of the victim's survival. In an emergency, seconds count. The Mustang Survival Water Rescue Kit contains everything the first responder needs to conduct a basic emergency water rescue: 1 M.I.T. 100 Inflatable PFD, 1 Rescue Stick™ and 1 Throw Bag all in a heavy-duty storage case. Complete with a quick reference instruction sheet and desiccant.

Features

1 M.I.T.100 Inflatable PFD (manual) to protect yourself (USCG Type V (Commercial Use); Type III (Recreational Use)
1 MRD100 Rescue Stick™ (automatic) to stabilize the victim
Rescue Stick™ has 35 lb of buoyancy providing emergency flotation for multiple victims
1 MRD075 Throw Bag to retrieve the victim
1 customized heavy-duty drop tested, impact-resistant, air and watertight protective case. This case meets military, ATA and federal specifications

The MSD576 is the next evolution of Mustang Survival's constant wear dry suit.It is based on the functionality of our legendary Swift Water Rescue Dry Suit and is available in sizes M-XXL. We have updated the design and added several new features, including our Rapid Repair Technology, to improve the mobility and function specific to water rescue professionals.

Features

Rapid Repair Technology™ enables users to replace neck and wrist seals and repair small leaks in an hour or less
YKK metal entry zipper
TIZIP® zipper relief opening
Closed comfort system adjustable neck seal
Trim-to-fit neoprene wrist seal
CORDURA® wrist and ankle overcuffs with Velcro® closures for adjustability
Ballistic nylon reinforced elbows, knees and seat
Two-point attachment removable suspender system for an improved fit, mobility and comfort
GORE-TEX® waterproof & breathable dry suit fabric
Integrated GORE-TEX dry socks
Pull adjust waist band
SOLAS retro-reflective tape on the arms for increased visibility
Neoprene knee pads and elbow pads help prevent injury
Nylon reinforced seat
Compatible with MA7105 Carrying bag
Custom Order Features:Agency markings and other colors available by special order
Latex or neoprene neck seal
Latex wrist seals

When it comes to flotation, it’s easy to get overwhelmed by the many types and varieties that are available. When we envisioned the LiftR™ series, we wanted an easy to use, multi-purpose, modular, and scalable system. By keeping it simple, we designed an inflation system with optional automatic or manual inflation, which is compatible with all S&S Precision carriers and other load carriage systems. No matter your mission, LiftR™ is the answer to your flotation needs. The LiftR™ is available in both 40 and 80 lb lift options with either auto or manual inflation. Additionally, the LiftR™ is equipped with an oral inflation tube for re-inflation. Since the LiftR™ is designed to help float the user in a face-up operation, it allows the user to manually dump air or deflate the unit quickly with a built-in manual air dump/over-inflation valve. The LiftR™ uses standard C02 cartridges and are easily able to be replaced by the user.

Features:

Flotation system used in surface and subsurface operations
ANU Approved with 45G CO2 cartridge to depth of 50 fsw
40 lbs. of lift at the water surface
Floats user in a face-up orientation
Low profile, self-packing system
Can be worn with or without armor with a standalone harness
Multiple attachment system accessories
Auto or manual inflation options available
Fits most plate carriers
Manual air dump/deflation
Available on GSA

Made of a new 3.6 oz 100% ripstop nylon along with 4-way stretch Tweave, the Huron Hot Weather Uniform consists of Blouse, Pant and Boonie Hat. All-in-all, it’s a pretty straight forward uniform as far as pocket layout goes, which is right on time for hot-wet operations.

With the help of Watershed® these Dry Bags will keep important items on waterborne operations, drier than the Sahara Desert thanks to YKK Aquaseal welded seems. There are two sizes available; 8” x 10” and 6” x 7”. Both have a MOLLE/PALS mounting system, and oral inflate/deflate valve with cover, can be used to adjust the pouch’s buoyancy and to ensure that the RF welded seams have not been compromised. The 8”x 10” Dry Bag has a laser cut MOLLE/PALS field on the front of the bag that allows users to attach additional gear.

10” x 8” x 2¼” - Large
6” x 7” x 2½” - Small
YKK Aquaseal on both bags
Laser Cut MOLLE field on front of 8” x 10” Dry Bag
Optional 3 Mag insert for the 8” x 10” Dry Bag
Oral inflate/deflate valve with cover
Watershed® Alliance

The Belt-M™ features a 1¾” wide outer belt with two options for inner belts; the Comfort Inner Belt or the Riggers Inner Belt. The outer belt exterior features laser cut ½” MOLLE/PALS field and an adjustable 1” wide ITW G-Hook at either end of the belt. The MOLLE/PALS webbing field is constructed from a high tensile strength, lightweight, abrasion resistant, and hydrophobic composite material. The outer belt is stiffened, making it a suitable load bearing platform and gun belt.

INNER BELT

Riggers Inner Belt

High strength Type 13 webbing
Drop forged steel alloy cam buckle

Comfort Inner Belt

Closed-cell foam pad sheathed in four-way stretch 1” tubular nylon
Form fitting & low-profile
1” adjustable cam buckle

OUTER BELT

Laser cut MOLLE/PALS field constructed from high tensile strength, lightweight, abrasion resistant, and hydrophobic composite material
Adjustable 1” wide ITW G-Hook on either end of the belt
Stiffened, suitable as a load bearing platform and gun belt
Outer Belt secures to the inner belt by Velcro in conjunction with ITW G-Hooks

The Peacemaker #PM-OCP003-BLK OC pouch is designed for use with Mk3 cannisters.

#PM-OCP003-BLK can be mounted to an overt carrier or a duty belt.

Length: 140mm
Width: 50mm
Colour: Navy
Finish: 900 Denier 100% Polyester
Closure: Single Snap (Two Positions)
Features: Eyelet Drainage

Load Carriage Options
Carrier: Nylon Modular Lightweight Load-carrying
Equipment (MOLLE) system is used to attach
#PM-OCP003-BLK to the Pouch Attachment Ladder
System (PALS) on all overt load bearing carriers.
Duty Belt: Nylon Modular Lightweight Load-carrying
Equipment (MOLLE) system is used to attach
#PM-OCP003-BLK to standard 50mm/2” duty belt.
Covert Pouch Rail: Nylon Modular Lightweight
Load-carrying Equipment (MOLLE) system is used to attach
all operational pouches to #PMPR0001 Peacemaker Pouch
Rail for covert operators.

Huron™ Light Weight Assault Pack

ENHANCED DESIGN FEATURES:

• Hydration port
• 2” Padded lumbar support
• Internal retention straps
• PALS webbing for MOLLE attachment
• Removable shoulder straps
• Drag handle
• Antimicrobial/FR treated padded spacer mesh
• Top Front Exterior Pocket: 12.5” H x 9” W x 2.75” D
• Bottom Front Exterior Pocket: 10.5” W x 7.5” H x 2.75” D
• External Side Pockets: 11” H x 6.5” W x 1.5” D
• Mesh Pockets: 10” H x 8” W & 7” H x 12.5” W
• Wt. 4.31 lbs.
• Cubic Liters: 47.83L
• Dim: 25” H x 13” W x 9” D
ELONGATED MATERIAL LIFE & ABRASION RESISTANCE
• Engineered utilizing patented PV® material

ELONGATED MATERIAL LIFE & ABRASION RESISTANCE

Engineered utilizing patented PV® material
Three hydration ports
Two side sleeves
Internal hydration bladder pocket
PALS webbing for MOLLE attachment
Removable shoulder straps
Drag Handle
Removable internal storage zipper pocket
Removable beavertail
Antimicrobial/FR treated padded spacer mesh
Wt. 2.59 lbs.
Cubic Liters: 10.49L
Dim: 16” H x 8” W x 5” D

The Manta Strobe™ is a helmet mounted multi-spectrum light emitter optimized for military operations. Our goal is clear: keep it simple for the end user, provide the highest level of performance through “select” electronic components combined with smart programming for highest output and extended battery life. Primary Overt LEDs are visible beyond the FAR105.19 requirements (3 statute miles).

FEATURES:

One-handed intuitive operation with vibrating feedback
Other spectrums available upon request
Rugged Hybrid Tailcap is standard on all models
Zero accidental overt light discharge
IPX8 - Waterproof up to 150 feet
Weight with battery: 2.12 oz
Tool-less battery replacement (CR123A battery not included)
Includes the Manta Strobe™ Webbing Adapter (MWA)
MWA weight: 0.4 oz

Product Overview

The Light Assault Boot II is built with mobility and protection in mind. An EVA midsole moves naturally with your foot while providing plush shock absorption, and a slip resistant rubber outsole adds durability and traction. Lightweight Polyurethane treated Cordura® and genuine leather upper guarantee lasting comfort. Finished with rugged nylon laces that stand up to rough wear, this tactical assault boot is designed to take on any adventure.

More Features

• Speed Lace System
• 8” Stack Height
• Weight: 14oz. (based on size 9)
• AR670-1 Compliant

A synthetic insulated cold weather windproof pant.

Construction

Hybrid materials construction allows for increased seat, knee, ankle durability and product life cycle sustainment

Cuff & Sleeves Configuration

Drawcord cuff closure vertically routed drawcord with enclosure mitigates snags and hang-ups

Pocket Configuration

Cargo pockets allow for the storage of hats, gloves and accessories

Waist & Belt Configuration

Waistline suspender loops for optional suspender attachment

Elasticized, adjustable nylon web waist allowing for waist size flexibility

Zippers & Fly Configuration

Full side zips allow easy entry and exit over

BREAKAWAY NIGHT VISION GOGGLE MOUNT

The G24 Mount has been field tested by operators and fine-tuned from their hands on experience with our product. Pioneering the “break away” feature, this mount disconnects from the base under stress if desired reducing the potential for neck injury of the operator. The G24 mount is your “go to” for night vision goggles. Mount/shroud kits available.

Dovetail shoe interface securely locks NVG’s into place
Breakaway feature reduces the risk of neck injury
Ergonomical adjustments allow for one handed operation
Maintains a very low-profile on the helmet
Rail interface & extended models available
Developed & battle proven by U.S. & NATO SOF

A synthetic insulated cold weather windproof jacket that is worn when conducting Direct Action tasks in cold weather conditions.

Hem Configuration

Drawcord hem closure vertically routed drawcord with enclosure mitigates snags

Logos & Label Configuration

4x4.5 Velcro® Upper Arm identification patches with VLite™ retention ring allowing for the application of IFF markings/devices

Pocket Configuration

Insulated zip lower torso pockets act as hand warming pockets when not wearing gloves

Upper arm zip pockets accessible when wearing LCE

Zippers & Fly Configuration

Full zip closure (w/No Slip Zip™) prevents zipper from self-opening at collar

A waterproof, breathable, and durable jacket shell that is worn when conducting full spectrum combat or law enforcement operations in a wet weather environment.

Cuff & Sleeves Configuration

Arm cuff Velcro® closures permits secure seal at cuff.

Hood Configuration

Fixed Hood (with elasticized stow loop) allows the hood to be stowed in order to mitigate snags.

StowHood™ can be stowed in collar when not required.

Patterning

Military fit allows for layering during cold weather conditions.

Waist & Belt Configuration

Drawcord waist closure vertically routed waist drawcord minimizes interference with duty belt and PPE.

Logos & Label Configuration

4x4.5 Velcro® Upper Arm identification patches with VLite™ retention ring allowing for the application of IFF markings/devices.

Internal waterproof tuff label identifies individual uniform within sub-unit.

Pocket Configuration

Internal stretch zip pockets stores personal items.

Chest pockets store personal items.

Internal zip pockets and external chest pocket stores personal items.

Upper arm zip pockets accessible when wearing load carriage equipment and PPE.

Zippers & Fly Configuration

Centerline zip closure permits easy on/off over equipment.

Underarm zip vents enhances ventilation when worn with PPE.

A waterproof, breathable, and durable pant shell that is worn when conducting full spectrum combat or law enforcement operations in a wet weather environment.

Cuff & Sleeves Configuration.

Drawcord ankle cuff closure tightens over boot. Vertical routing prevents snag.

Logos & Label Configuration

Internal Waterproof TuffLabel – allowing for individual ID and mitigating confusion when issued as a uniform clothing item to end-users.

Pocket Configuration

Thigh cargo pockets store hats, gloves and accessories.

Waist & Belt Configuration

Elasticized, adjustable nylon web high rise waist adds sizing flexibility.

Patterning

Military fit allows for layering during cold weather conditions.

Zippers & Fly Configuration

Full side zips allow easy entry and exit over boots. Adjusts for custom ventilation.

Product Overview

The SI Light Patrol Boot is built to stand up to challenging terrain without slowing you down, for the short mission or the long trudge. A tough yet light canvas, leather and sueded upper helps protect your foot from dirt, rocks and other debris, while a high-cut, secure-lace design provides the support and stability necessary to go the distance. Medial eyelets enhance airflow to release excess heat during long periods of wear, and a thick, multi-directional traction pattern on the outsole of this rugged Oakley boot instills sure-footed confidence through every step-and over any surface-of your journey.

More Features

• Combination canvas, leather and sueded upper provides durability and support
• Rugged outsole pattern offers durable traction
• Medial eyelets enhance airflow
• 8'' Height
• Imported

A no melt/no drip materials based under body armour combat shirt that is worn when conducting Direct Action tasks.

Technical Features

PPE Compatible allowing the shirt to be functionally worn with body armour

Low Profile Zip Neck – allowing collar to be worn either open or as a neck protector

Cuff & Sleeves Configuration

Arm cuff velcro closures allow for fully enclosed sleeves

Integrated Features

Removable Soft Elbow Pads – allowing the option to use integrated soft elbow pads if required

Pocket Configuration

Upper arm zip pockets allow for convenient pocket accessibility when worn with PPE

Construction

Underarm mesh vents allow for enhanced ventilation when worn with PPE

Logos & Label Configuration

Upper arm IFF Velcro® 4x4.5” (w/V-Lite™ retention ring) enhancing the retention of electronic IFF devices

Cuff & Sleeves Configuration

Velcro® ankle cuff closure seals over boots

Integrated Features

Internal knee cap sleeve fits removable soft knee pads or fully compatible (separately purchased) LEAF knee caps

Patterning

Gusseted crotch for comfort and freedom of movement

Pocket Configuration

Hand pockets (with internal folding knife pocket) allowing for the secure carriage of a standard folding knife

Thigh Velcro Flap Pockets – allowing for convenient pocket accessibility

Cargo Flap Pockets (expandable) – allowing for dump pocket capability

Elongated Drop-in Seat Pockets – allowing for optional/extra elongated item storage

Waist & Belt Configuration

Adjustable waist (c.2”) allowing for waist sizing flexibility

The Peacemaker Water Bottle Pouch 003 , is designed to securely carry a wide variety of water bottle shapes and sizes in the field.

MADE IN AUSTRLIA – BY AQUATERRO

Multi-Purpose Load Bearing Vest Undershirt, purpose built by 100% Australian Owned and Operated Aquaterro.

The Peacemaker® Counterweight Pouch 001 (PMCP001), is Australian Made designed and manufactured by Aquaterro. The PM-CP001 is capable of securely carrying multiple lead counterweights (max 6 x Team Wendy-Small) and is user configurable. Weights can be placed and stacked as required for the ideal counterbalance as determined by the user.

DigitalHubPopup

PURCHASE OPTIONS

CONTACT OUR BUSINESS DEVELOPMENT TEAM FOR PURCHASING INFORMATION.

CONTACT US

SUBSCRIBE TO BE NOTIFIED OF NEXT GENERATION SQUAD WEAPON UPDATES

We will never send you spam, and you always are in control of your preferences.

DigitalHubPopup

PURCHASE OPTIONS

THIS ITEM CAN BE PURCHASED DIRECTLY FROM THE AQUATERRO ONLINE STORE.

SHOP NOW

CONTACT US FOR ALL GOVERNMENT ENQUIRIES AND PURCHASES.

CONTACT US

SUBSCRIBE TO BE NOTIFIED OF NEXT GENERATION SQUAD WEAPON UPDATES

We will never send you spam, and you always are in control of your preferences.

The Peacemaker® Team Wendy® EXFIL® Ballistic Helmet Cover (PM-HMC003), provides the shell with protection and enhanced integration and interoperability with head borne equipment and accessories.